Honda CB125 Side Panel

This is a 3D scan of a Honda CB125 Twin side panel from 1980.

The scan is of the right side panel.
Anyone who can print this panel should also be able to mirror it to print a left side panel.

Please consider this scan the starting point of your project. It is a pretty darn good scan, but to get a flawless side panel out of it will take some elbow grease.

The original part was made from ABS. This is also a material that can be used in a 3D printer. You can also consider using ASA which is more weather resistant. The standard PLA material most people print in isn't the best for outdoor/automotive uses, but after painting it it goes a long way and it's cheap.

Left panel

• Honda Part nr: 83640399700ZA
• CMSNL Product number:HO0112.7914

Right panel

• Honda Part number:83540399700ZB
• CMSNL Product number:HO0111.4542

Fitting models

Other models that this item fits to.

• CB125T2 BELGIUM
• CB125T2 GENERAL EXPORT / KPH
• CB125T2 GENERAL EXPORT / MPH
• CB125T2 ENGLAND
• CB125T2 EUROPEAN DIRECT SALES
• CB125T2 FRANCE
• CB125T2 GERMANY FULL POWER TYPE 1
• CB125T2 SOUTH AFRICA
• CB125T 1980 (A) BELGIUM
• CB125T 1980 (A) GENERAL EXPORT / KPH
• CB125T 1980 (A) GENERAL EXPORT / MPH
• CB125T 1980 (A) ENGLAND
• CB125T 1980 (A) EUROPEAN DIRECT SALES
• CB125T 1980 (A) FRANCE
• CB125T 1980 (A) GERMANY FULL POWER TYPE 1
• CB125T 1980 (A) SOUTH AFRICA
• CB125T2 GERMANY 10 PS 2
• CB125T2 SWITZERLAND
• CB125T2 AUSTRALIA
• CB125T 1980 (A) GERMANY / 10 PS TYPE 2
• CB125T 1980 (A) SWITZERLAND
• CB125T 1980 (A) AUSTRALIA